The toluene diisocyanate has 2,4-toluene diisocyanates and 2,6-toluene diisocyanate (TDI).

There are two isomers of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate (TDI). According to the content of the two isomers, there are three standard products in the industry: (1) TDI-65 contains 2,4-TDI65%, 2,6-TDI35%; (2) TDI-80 contains 2,4- TDI80%, 2,6-TDI20%, more common; (3) TDI-100 contains 2,4-TDI100%. Carbon dioxide occurs with water effect. Easy to work with compounds containing active hydrogen atoms. Linear polyurethane or polyurethane resin with diol effect.

Miscible with ether, diethylene glycol, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene and olive oil. It can react with hydroxyl-containing compounds, water, amines and compounds with active hydrogen atoms to generate carbamate, urea, semicarbazide, etc. Toluene is nitrated with mixed acid to obtain 2,4- and 2,6-dinitrotoluene, and then hydrogenated and reduced in the presence of nickel catalyst to obtain 2,4- and 2,6-diaminotoluene, which is then reacted with light in chlorobenzene solution. produced by gas reaction.

Dibenylmethane diisocyanate, referred to as "MDI", is an organic substance, a chemical formula C15H10N2O2.

M-xylene is an organic compound with a molecular formula C8H10, a molecular weight of 106, a colorless concussion liquid, a odor like toluene.

The propanol, but also glycerol, chemical formula is C3H8O3, colorless, odorless, sweet, and appearance showing a clear liquid, is an organic substance, can absorb moisture from air, can also absorb hydrogen sulfide, hydrogen cyanide and sulfur dioxide .

Nitrogen, chemical formula is n₂, which is a colorless tasteless gas.

Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.

The industrial neighborl xylene is a raw material, first washes the acid layer to the acid layer colorless, then use 10% sodium hydroxide solution, water is washed to pass, and the aqueous layer is separated, and the calcium chloride is borned with anhydrous carbon. After the distinction is low, the intermediate fraction is collected, that is, a pure product.

Sodium peroxide is an inorganic substance with a chemical formula of Na2O2 and a molecular weight of 77.98. Beige powder or granules. The relative density is 2.8.

Oxygen is a simple substance composed of oxygen. The chemical formula O2 has more vivid chemical properties, and most of the elements can react with oxygen.

Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties.

Hydrogen Peroxide Solution is an aqueous solution of hydrogen peroxide.

Acetic acid, also called acetic acid, glacial acetic acid, chemical CH3COOH, is an organic monovic acid, which is the main component of vinegar.

Citric acid (CA), also known as citric acid, with the molecular formula C₆H₈O₇, is an important organic acid. It is colorless crystals, odorless, has a strong acid taste, is easily soluble in water, and is a natural preservative and food additive .

Lactic acid is a carboxylic acid, the molecular formula is C3H6O3, containing a hydroxyl group, belonging to α-hydroxyory (AHA). In an aqueous solution, the carboxyl group releases a proton to generate lactate ion CH3CH (OH) COO-.

citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.

Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.

The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged. Generally, the concentration of lactic acid in the blood is from 1-2 mmol / L during non-exercise, and can rise to 20 mmol / L during intense exercise.

1. Used to produce 1,4-butanediol γ- Butyrolactone, tetrahydrofuran, succinic acid, unsaturated polyester resin, alkyd resin and other raw materials are also used in and pesticides. 2. Act as collector in metal beneficiation. 3. It is used in organic synthesis and also as an intermediate of synthetic fiber. 4. Maleic anhydride is an important basic raw material of unsaturated organic anhydride.