The toluene diisocyanate has 2,4-toluene diisocyanates and 2,6-toluene diisocyanate (TDI).

There are two isomers of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate (TDI). According to the content of the two isomers, there are three standard products in the industry: (1) TDI-65 contains 2,4-TDI65%, 2,6-TDI35%; (2) TDI-80 contains 2,4- TDI80%, 2,6-TDI20%, more common; (3) TDI-100 contains 2,4-TDI100%. Carbon dioxide occurs with water effect. Easy to work with compounds containing active hydrogen atoms. Linear polyurethane or polyurethane resin with diol effect.

N-Methyldiethanolamine is a chemical substance with the molecular formula C5H13NO2. It contains two hydroxyl groups and one amino group.

HCFC-141b (monofluorodichloroethane) is a high-purity liquid widely used in cleaning and solvent fields. Because its damage to the ozone layer is 1/10 of CFC-113, it is designated as an ideal substitute for fully halogenated chlorofluorocarbons. HCFC-141b is a widely used non-perhalogenated chlorofluorocarbon. Although its destructive effect on the ozone layer has been greatly reduced compared to fully halogenated chlorofluorocarbons, it can still cause damage to the ozone layer that is difficult to recover. As a result, its use is gradually being reduced around the world.

Appearance and properties: colorless liquid, almost odorless Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃ Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935

Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935 The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.

Features: Contains two hydroxyl groups and one amino group. Hydroxyl reduces the vapor pressure, increases the solubility, is conducive to the absorption of acid gas, and can increase the concentration, reduce circulation, and reduce energy consumption. The presence of the methyl group in the amino group reduces the alkalinity and activity of the amino group and reduces the CO2 absorption rate. The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec.

Solubility: insoluble in water, soluble in most organic solvents such as alcohol, ether.

It is also used in the manufacture of butyl acrylate, butyl acetate, ethylene glycol butyl ether, as an extractant for organic synthesis intermediates and biochemical drugs, and in the manufacture of surfactants.

Solubility: Insoluble in water, acid and alkali, but soluble in organic solvents such as alcohol, ether and benzene.The preparation methods of biphenyl include the chemical composition method of making biphenyl through benzene pyrolysis and the separate extraction method of making biphenyl through various coal tar fractions. The mass fraction of biphenyl in coal tar is 0.20%-0.40%, and coal tar extraction method and chemical composition method coexist.

Castor oil is the triglyceride of fatty acid, and castor oil is present in the seeds of castor oil, and its content is 35%~57.

In fact, any kind of antioxidant can not fully meet these conditions. Therefore, in actual application, it is often based on the variety, use and processing method of engineering plastics, using the strengths of various additives and cooperating to produce synergistic effects.

Chemical nature: Forbidden qualitative: strong oxidizing agent, strong reducing agent, strong acid, strong base. Ecological nature: Ecotoxicity EC50: 1.2 ~ 1.51mg / L (luminous bacteria, microtox toxicity test) Biodegradability Miti-I test, initial concentration of 100 mg / L, sludge concentration 30 mg / L, 2 weeks later degraded 77%. Non-biodegradability In the air, when the hydroxyl radical concentration is 5.00 × 105 / cm3, the degradation of the half-life is 7.8d (theory). Other harmful effects The material is damaged by the environment and should pay spe

Glycerol, also called glycerol, with the chemical formula c3h8o3, is colorless, odorless, sweet, with a clean and viscous liquid appearance. it's miles an organic substance that may take in moisture from the air, as well as hydrogen sulfide, hydrogen cyanide and sulfur dioxide. insoluble in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oils, it's miles the skeleton factor of triglyceride molecules.

Industrial ammonia is an aqueous solution containing 25% to 28% ammonia. Only a small part of ammonia molecules react with water to form ammonia monohydrate, which is a weak base that only exists in ammonia.

Tributyl acetyl citrate is CAS 77-90-7 chemical substances.

Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.

HCFC-141b (monofluorodichloroethane) is a high-purity liquid widely used in cleaning and solvent fields.

The propanol, but also glycerol, chemical formula is C3H8O3, colorless, odorless, sweet, and appearance showing a clear liquid, is an organic substance, can absorb moisture from air, can also absorb hydrogen sulfide, hydrogen cyanide and sulfur dioxide .

M-xylene is an organic compound with a molecular formula C8H10, a molecular weight of 106, a colorless concussion liquid, a odor like toluene.

It is an efficient catalyst for removing mercaptan in light oil. Gasoline refined from sour crude oil contains higher mercaptan sulfur content.