Hydroxypropylmethylcellulose-manufacture,factory,supplier from China

(Total 24 Products for Hydroxypropylmethylcellulose)
Hypromellose (Hypromellose), also called hypromellose, is one of the non-ionic cellulose mixed ethers.
  Contact Now
Titanium dioxide is an inorganic, chemical formula TiO2, white solid or powdered amphoteric oxide, molecular weight 79.9, has non-toxic, optimal opacity, optimal whiteness and brightness, is considered to be the best in the world today A white pigment.
  Contact Now
Potassium hydroxide is strongly alkaline and corrosive, and its properties are similar to sodium hydroxide, which can cause burns. It can absorb water and dissolve in the air, and absorb carbon dioxide to gradually become potassium carbonate. The pH of the 0.1 mol/L solution is 13.5.
  Contact Now
Appearance and properties: white or almost white fibrous or granular powder Density: 1.39 g/cm3 Solubility: almost insoluble in absolute ethanol, ether, acetone; swelling in cold water into a clear or slightly dirty colloidal solution Stability: The solid is flammable and incompatible with strong oxidants.
  Contact Now
White oblique crystals, industrial products are white or light gray lumps or rods. Easily soluble in water, emits a lot of heat of dissolution when dissolved, soluble in ethanol, slightly soluble in ether. It is deliquescent and has strong water absorption. Potassium hydroxide is strongly alkaline and corrosive, and its properties are similar to sodium hydroxide, which can cause burns. It can absorb water and dissolve in the air, and absorb carbon dioxide to gradually become potassium carbonate. The pH of the 0.1 mol/L solution is 13.5.
  Contact Now
Only a small part of ammonia molecules react with water to form ammonia monohydrate, which is a weak base that only exists in ammonia.
  Contact Now
N-Methyldiethanolamine is a chemical substance with the molecular formula C5H13NO2. It contains two hydroxyl groups and one amino group.
  Contact Now
A substance that can reduce the surface tension of water, solution, suspension, etc., prevent the formation of foam, or reduce or eliminate the original foam. [1]
  Contact Now
Appearance and properties: colorless liquid, almost odorless Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃ Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol Density (D4) 0.925-0.935
  Contact Now
Features: Contains two hydroxyl groups and one amino group. Hydroxyl reduces the vapor pressure, increases the solubility, is conducive to the absorption of acid gas, and can increase the concentration, reduce circulation, and reduce energy consumption. The presence of the methyl group in the amino group reduces the alkalinity and activity of the amino group and reduces the CO2 absorption rate. The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec.
  Contact Now
Antioxidant is a kind of chemical substance. When it is only a small amount in the polymer system, it can delay or inhibit the progress of the polymer oxidation process, thereby preventing the aging of the polymer and prolonging its service life. It is also called " Anti-aging agent".
  Contact Now
Methyl 2-chloropropionate is an organic compound with the chemical formula C4H7ClO2, mainly used as an intermediate in pesticides, pharmaceuticals, and spices.
  Contact Now
Methyl Isobutyl Ether ether is also known as methyl isobutone, 4-methyl-2-pentanone.
  Contact Now
1.4, 4 '- methylene bis (2-chlorocene) The molecular weight is 267.15, the molecular formula is C13H12N2 CL2
  Contact Now
citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.
  Contact Now
Ethylene glycol ether (2-ethoxyethanol) is an organic compound with a molecular formula of C4H10O2 and a molecular weight of 90.12. It is a colorless and transparent liquid.
  Contact Now
The lactate dehydrogenase is converted to a left lactic acid during the fermentation process. Lactic acids are constantly occurring in general metabolism and motion, but its concentration generally does not rise. Only in the lactic acid occurs, lactic acid cannot be transported in time to increase. The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged.
  Contact Now
Physical nature Colorless concierge fluids have a fierce scent. Insoluble in water, dissolved in ethanol and ether. Benzyl alcohol, paf alcohol, 2-chloroethanol, ethylene glycol, furfural, dimethylformamide and acetonitrile were dissolved at room temperature. No corrosive metal.
  Contact Now
citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.
  Contact Now
Chemical nature: Forbidden qualitative: strong oxidizing agent, strong reducing agent, strong acid, strong base. Ecological nature: Ecotoxicity EC50: 1.2 ~ 1.51mg / L (luminous bacteria, microtox toxicity test) Biodegradability Miti-I test, initial concentration of 100 mg / L, sludge concentration 30 mg / L, 2 weeks later degraded 77%. Non-biodegradability In the air, when the hydroxyl radical concentration is 5.00 × 105 / cm3, the degradation of the half-life is 7.8d (theory). Other harmful effects The material is damaged by the environment and should pay spe
  Contact Now
Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.
  Contact Now
its density is 1.542g/cm3, its melting point is 153-159℃, and water and carbon dioxide are differentiated and launched above a hundred seventy five℃. citric acid is without problems soluble in water and ethanol, its solubility is 59% at 20℃, and the ph of its 2% aqueous solution is 2.1.
  Contact Now
The melting point is 13.5°C, the boiling point is 140.9°C, and the density (20/4°C) is 1.0611g/cm3. The chemical nature is lively. It is easy to polymerize in air and can be reduced to propionic acid by hydrogenation. Addition with hydrogen chloride generates 2-chloropropionic acid. Used in the preparation of acrylic resins and other organic synthesis. It is made by oxidation of acrolein or hydrolysis of acrylonitrile, or made by carbon monoxide, acetylene and water under the action of nickel catalyst.
  Contact Now

Relate News

Glacial acetic acid is actually anhydrous acetic acid, an organic compound. As an organic acid, acetic acid will condense into ice-like crystals when it is lower than the melting point.
Suitable for tiles, marbles, plastic finishes, adhesives, etc., which can reduce the amount of cement. The water retention of HPMC prevents rapid cracking of the slurry after coating and strengthens the strength of the slurry after hardening.
Titanium dioxide itself has strong photochemical activity, and is prone to inactivation, yellowing, powdering, etc. under the sun, especially ultraviolet rays. A layer of inorganic material is wrapped on the surface of the titanium dioxide, which not only gets rid of the above defects, but also improves the characteristics of the titanium dioxide product.
Ammonia water, also known as Ammonia water, is a solution of ammonia dissolved in water, is colorless and transparent liquid, has a special irritating odor, volatile, corrosive, weak alkaline, unstable and flammability and other characteristics.
Xylene is a colorless and transparent solution. Xylene has a pungent taste and is flammable. It can be mixed with ethanol, chloroform or ether at will, and it is insoluble in water. Xylene belongs to a slightly toxic chemical substance in daily life, but it still has a certain degree of harm to all aspects of our body functions.
Diatom mud is a natural and environmentally friendly interior wall decoration material, which is used to replace wallpaper and latex paint, and plays the role of interior wall decoration and indoor air purification. Powder packaging, not liquid barrels. The main raw material of diatom mud is the diatom mineral diatomite formed after hundreds of millions of years. Diatom is a kind of algae living in oceans and lakes. Diatom mud is made of natural substances deposited by diatoms, aquatic plankton living in millions of years ago.
Ammonia is one of the important varieties for chemical product inspection. Ammonia inspection is one of the important links widely used in industries such as industry, agriculture, textiles, medicine, printing and dyeing, and food.
The appearance of potassium hydroxide is white lumps or powder, with strong corrosiveness and strong alkalinity. When potassium hydroxide is exposed to gas, it is easily wetted by moisture in the air, digesting and absorbing carbon dioxide to become potassium carbonate.
Comb grass is a characteristic plant that can be grown all over China. The oil processed from the seeds of comb grass is comb grass. Glycine max is a special medicine made from oil, which has extremely high medicinal value.
Acrylic paint is a one-component self-drying weather-resistant and anticorrosive paint made by advanced technology based on traditional acrylic resin and added with long-life chlorosulfonated polyethylene rubber, weather-resistant pigments and fillers, and weather-resistant additives recognized by China and foreign countries.
The gasoline products of different specifications can be adjusted according to the effective selection of MMT, MTBE, recombined gasoline, catalytic gasoline and straight-run gasoline.